 |
 |
| MBD-PDSME+-O |
- PDSME+ (Standard Retail Pack)
|
| MBD-PDSME+-B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 12" x 9.6", (30.5cm x 24.4 cm)
|
| |
|
| CPU |
- Single LGA775 ZIF Socket
- Supports a Quad-Core Intel® Xeon® 3200 series processor
- Supports a Dual-Core Intel® Xeon® 3000 series processor
- Supports a Quad-Core Intel® Core™2 Extreme series processor
- Supports an Intel® Core™2 Quad series processor
- Supports an Intel® Core™2 Duo series processor
- Supports an Intel® Pentium® processor E2000 series
- Supports a Dual-Core Intel® Pentium® D processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Celeron® processor E1000 series
- Supports an Intel® Celeron® processor 400 series
- NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
|
| System Bus |
- 1066 / 800 / 533 MHz system bus
|
| |
|
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
|
| Memory Type |
- DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
|
| Chipset |
- Intel 3010 (Mukilteo-2P) chipset
- ICH7R + PXH + Intel® 82573V + Intel® 82573L
|
| Serial ATA |
- Intel® ICH7R SATA2 (3 Gbps) controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only)
- Adaptec:
RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- Supermicro Intelligement Management
- (Optional: AOC-SIM1U+)
- NOTE: Must use dedicated LAN for IPMI function
|
| Network Controllers |
- 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
| VGA |
- On-board ATI ES1000 (16MB) graphics
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| Serial ATA |
- Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- Up to 4x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 1 internal header for 2 ports
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x internal header
|
|
|
|
|
| 2U |
|
| Tower / 4U Rackmount |
|
| Mid-Tower |
|
| Important Note |
- For a general system, a 400W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability].
|
| |
|
| PCI-Express |
- 1 (x4) PCI-e slot
- 1 (x8) PCI-e slot
|
| PCI - X |
- 2x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix BIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- SMBIOS 2.3
- USB Keyboard support
|
| |
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
- Suspend to RAM (STR)
|
| |
|
| CPU |
- Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5, ±12V, +5V Standby, VBAT)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
|
| FAN |
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
|
| LED |
- CPU / System Overheat LED
- Standby alert LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
| FCC |
- Passed to meet FCC standard requirement
|
|
